Glass cutting

Glass works
Glass and equipment for the processing of it gradually improved during the development of industry Glass cutting technology improved as well.

If we look back at 30 years, we can see that these technologies are not perfect for Today at the glass are processed and cut down many times over. Of course, if we consider the industrial robot - made a computer program - to control machinery, which is engaged in cutting, cutting glass now be implemented in different forms. For example, a method of waterjet cutting and sandblasting.

Waterjet Cutting Glass

In the way of waterjet cutting glass is cut by a stream of abrasive fluid thickness of hair. This method is unique because it is possible to do both through the holes in the glass that will not affect the strength of a glass or a number of different prior to the computer. Such glasses can be used not only in the later. But in art to decorate with - such as stained glass windows.



How to cut this advantage. For example, the temperature in the low cut - this will occur because of heat produced when cutting glass has been absorbed almost immediately with water. Therefore, technology waterjet cutting glass to avoid the heat. Low temperatures in the glass cutting reduces the chance of deformation of the material melting or burning of the surrounding area. Water jet cutting to remove the need to process any of the edges of the glass area because of the impact of cooling on the edge of the missing parts machined.



Glass cutting can be done from anywhere. It is not necessary to drain out before all Water jet cutting glass can also be implemented in line with any curvature and complexity. That is why it is possible to reproduce complex shapes and profiles.
The quality of the surface of the glass is very good. Rough edges of the glass can do - reduce this need · For further processing.

Process of waterjet cutting savings due to cheaper materials such as water and sand. In addition, the width of the cut is very small, rare materials can be saved. Cut glass is made by using, which does not require sharpening; In addition, drilling is made of the same tool.

In addition, glass waterjet cutting is very safe. For example, with no radiation. Trip to the possibility of small particles and slag have been excluded. Dust in the air during the glass cutting, cutting away with the processing of glass with a volume of about 85-95 dB.

Not just cut glass. But also cut other materials produced by the waterjet stream fluid - abrasive efficient processing of very hard materials.