Waterjet-Technology

Water jet technology is easy to understand. System based on the principle of erosion. Water pressure to 60,000 pounds per square inch, and focused on narrow, as small as .003 "- is directed at the significant and dramatic without shredding or grinding through the material.

Low water pressure, substance required to meet certain standards. Water under the process of deionization or reverse Osmosis system will remove the application process is solid, like iron and calcium and can often be done with a water softener Water and then through the filtration system which removes particles down to 0.45 micron pure it is necessary to maintain pumps and high pressure seals. Without it, the obstruction is important minerals in the system.
Argon to a pressure intensifier pump up to 60,000 pounds per square inch. After these three steps - deionization filter and intensification - Water Jet is ready to proceed.

Waterjet Machine

For products such as paper, plastics, food, rubber, insulation, paper and paperboard, water alone will penetrate materials. For more difficult materials such as metal, glass and polished stone will be sent via a narrow entrance to the cutting head placed above the material being cut. The size of the opening will be tailored to the density of the material. Materials that can be absorbed easily into the water just off the mouth is small. .003 ", While the heavy material may be used to increase the wear and Mouth up to .016".

Water from the mouth to the speed of Mach 2.5 before the dominant material to cut. Materials in support grates on the table that vary in size Below support grates, swimming pool, playing uncompromising diffuses by high-pressure nozzles. Water, turned the engine off once, return back to quiet.
How to control the cutting path of the mechanical movement which is controlled by basic computer to sophisticated numerical Control (CNC) system for motion. Multi-direction ability to cut and cut several options to enhance the flexibility of cutting and waterjet technology.

List of materials waterjet system to penetrate the end it seems Day-use is applied to foam, phenolic GIO, steel armor, polyurethane, titanium, Kevlar, aluminum, phenolic linen, copper, Neoprene, copper , glass, stainless steel, Spectra, fiberglass, paper, paperboard acrylic, ceramic tiles, rubber wood, glass, marble and granite.
Process of erosion can be controlled such that a burring or rough edges, which often reduces the need for additional finishing operations. Holes beginning is trained by waterjet parts and can be optimally used to support a piece of material.