Water Jet Machines

Water jet machine using the (water), high-speed liquid jet with a narrow cut material It is nearly the speed of 2,000 feet per second will be eroded material from the workpiece location of the impact of the jet fluid. Pressure of the liquid about 60 kpsi at impact. Off the normal route is about .002 "to .040" wide average person can cut the shape of any object is effectively two dimensional, with the help of the CNC control of the dive location.

Waterjet Machine

These Water Jet machine is a technology, "green" with this technology Jet, do not waste are produced which is harmful to our environment. Water jet technology is very diverse, it can also cut a piece of scrap recycled in large pieces. Parts may be stacked closely together in order to add material. It also saves material because it is a little kerf.

Water used in water Jet for back using the method of closed - looped very important, it only takes a little water. (Depending on the size of the hole cutting head), it can use about ½ to 1 gallon of water for normal use abrasive garnet is possible to use a natural substance that is non-toxic and can be recycled Water Jet Technology can. reduce dust in the air, smoke, smokes, and residues from cutting materials such as fiberglass and asbestos. Technology is very environmentally friendly and easy to use.

Material Water Jet generally include cutting foam composite, rubber, plastics, food, metal, tile, wood and much more while supplies that can not be cut as: diamond, ceramics, some and glass.

Water Jet Cutting is not typically limited by the depth of material it very proficient in cutting material at a depth greater than 18 "(45 cm) of water power drill Jet 's has led to anti-tank weapons. But it was a brief, research on new ideas that has been canceled.