Water Quality

Waterjet Cutting Machine - water specifications
All manufacturers have specific requirements for water quality. Please check with the manufacturer to get the details for the particular

Water supplied to the multiplier is key to cutting water jet due to a direct influence on the life of components such as valves, gaskets and control ports, a high concentration of total dissolved solids (TDS) will accelerate. All wear parts in contact with the water pressure due to increased abrasiveness of water from the TDS.

Waterjet Cutting Machine

As part of planning the installation, testing of water quality will be managed by the trading company that specializes in water conditioning equipment. The minimum information that must be provided by this analysis is the TDS, silica content and pH of companies such as Culligan able to perform these tests or you can try to "test the water quality" on the Internet.

Water through the water must be treated for the removal of the hardness of the reduction of TDS water softening is the process of charge exchange minerals that form the dimensions, such as football, the reduction of TDS is made and deionization (. DI) or reverse osmosis or RO elements generally better the lives of softening water.

water suppliers should be consulted to provide the most appropriate equipment for special conditions. It can be a good idea to ask the company that you wish to use should have a jet of water than any other high pressure off the system and check the references of some of them.

Steps to the best treatment for only a function of the water quality of life original and useful for stakeholders Sixty to 70 ppm of TDS is the best treatment of produced water TDS content of less than 0.5. parts per million (ppm) should be avoided because of the aggressiveness of the damage clean water to parts of the pump.